£2.78£4.42

Half Bag (12.5KG)

£3.28 (EXC VAT)

£3.34 (INC VAT)
80 bags to a pallet.

Standard Bag

£4.42 (EXC VAT)

£5.30 (INC VAT)
40 bags to a pallet.

Clear
SKU: polybound-brittany-bronze-1-3mm-3 Category:

Description

PolyBound Brittany Bronze 1-3mm is a finer grade of our Brittany Bronze 2-5mm. A very popular rounded resin bound gravel with a brown chestnut finish. When used on it’s own it has a nice gravelled look with a smooth texture making it popular for foot traffic and cycle paths. It is also suitable to mix into other grades for a unique blend and a stronger finish.

 

This gravel is also available in 2-5mm.

 

We strongly recommend the use of UVR resin with all PolyBound dried aggregates.

Additional information

Weight 25.00 kg
Choose Bags

Standard Bag, Half Bag (12.5KG)

TECHNICAL SPEC

  • Hardness – 7
  • PSV – 35-40
  • AAV – 4
  • AIV – 18
  • ACV – 12

 

PSV – Polished Stone Value
The PSV of an aggregate is a measure of the resistance of an aggregate to polishing and the value is established by subjecting the aggregate to a standard polishing process and then testing the aggregate with a portable skid resistance tester. Aggregate that has a PSV over 60 is regarded as a High Skid Resistant Aggregate. The higher the PSV figure the greater resistance the aggregate has to polishing.

 

AAV – Aggregate Abrasion Value
A known mass of aggregate chippings are set in resin in a small test panel and subject to abrasion on a grinding apparatus. The loss in weight of the aggregate after a specified time as a percentage of the original weight is the AAV.

 

AIV – Aggregate Impact Value
The aggregate impact value is a strength value of an aggregate that is determined by performing the Aggregate Impact Test on a sample. The AIV is the percentage of fines produced from the aggregate after subjecting it to a standard amount of impact. Below 10 would be regarded as strong, above 35 would normally be regarded as too weak to be used in road surfaces.

 

ACV – Aggregate Crushing Value
The aggregate crushing value is a value which indicates the ability of an aggregate to resist crushing. The lower the figure, the stronger the aggregate ie the greater its ability to resist crushing.