£5.34

Standard Bag

£5.34 (EXC VAT)

£6.41 (INC VAT)
40 bags to a pallet.

9999 in stock

SKU: polybound-autumn-quartz-2-5mm-3 Category:

Description

PolyBound Autumn Quartz 2-5mm is a popular warm honey, yellow and cream quartz, durable with semi rounded particles.

 

A beautiful, imported quartz with flecks of darker stone for a nice even natural surface with character. It can be mixed with the 1-3mm Autumn Quartz or darker aggregates can be introduced to create a contrast. Also available in Autumn Quartz 1-3mm.

 

We strongly recommend the use of UVR resin with all PolyBound dried aggregates.

 

Non UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.

Additional information

Weight 25.00 kg

TECHNICAL SPEC

  • Hardness – 7
  • PSV – 54
  • AAV – 0.6

 

PSV – Polished Stone Value
The PSV of an aggregate is a measure of the resistance of an aggregate to polishing and the value is established by subjecting the aggregate to a standard polishing process and then testing the aggregate with a portable skid resistance tester. Aggregate that has a PSV over 60 is regarded as a High Skid Resistant Aggregate. The higher the PSV figure the greater resistance the aggregate has to polishing.

 

AAV – Aggregate Abrasion Value
A known mass of aggregate chippings are set in resin in a small test panel and subject to abrasion on a grinding apparatus. The loss in weight of the aggregate after a specified time as a percentage of the original weight is the AAV.

 

AIV – Aggregate Impact Value
The aggregate impact value is a strength value of an aggregate that is determined by performing the Aggregate Impact Test on a sample. The AIV is the percentage of fines produced from the aggregate after subjecting it to a standard amount of impact. Below 10 would be regarded as strong, above 35 would normally be regarded as too weak to be used in road surfaces.

 

ACV – Aggregate Crushing Value
The aggregate crushing value is a value which indicates the ability of an aggregate to resist crushing. The lower the figure, the stronger the aggregate ie the greater its ability to resist crushing.